Professional Anti-vibration High Rebound Skateboard Truck Bushing

Professional Anti-vibration High Rebound Skateboard Truck Bushing

1.Material : High Rebound urethane

2.Size : 24*11/16mm ,25*11/16mm ,24*13/16mm ,24*15/15mm ,24*16*16mm ,24*15*15mm

3.Color : Black/Orange/Blue/Yellow/Green ect.

4.Design : Conventional deign available and customizd design accpeted

5.Certification : SGS CE EN13613

We provide various accessories, bushings, riser pads, hardware, kingpins, washers, tools, etc.

Bushings are either columned or cone shaped and can be made into different colors and hardness.

Riser pads come in PE, rubber, PVC, and TPR.

The hardware has Allen and Phillips shapes,all can be made to full form thread and half form thread.

They can be made different colors and sizes.Besides the normal kingpin,we can also make fixed kingpin which have silver and black color.

We also have T-tool,Y-tool and wax etc. 

How to Buy Best Bushings for Skateboards

What skateboard truck bushings do I need?

Skateboard bushings are rubbery-like rings that fit into the skateboard trucks.

Each skateboard truck usually has two bushings. The bushings are placed between the baseplate and the hanger and provide the cushion mechanism for turning the skateboard.

To be specific, one of the bushings provides the flexibility and turning capabilities of the skateboard truck, while the other allows the trucks to be loosened or tightened depending on your personal preferences.

Some riders tend to like their skateboard trucks tight, to better perform ticks. The stiffer the bushings, the more resistant the skateboard is to turning. Other skaters choose to loosen their skateboard trucks for street riding or cruising.

To determine the hardness of the skateboard bushings, we refer to the durometer.

Skateboard bushing durometer is usually measured on a Durometer A Scale which goes from 1-100 to measure hardness. Some companies use the B Scale which measures 20 points lower, allowing the scale to be extended by 20 points for harder bushings. So an 80b durometer is the same as 100a durometer.

FAQ

Q1.  Are you manufacture or trade company?

A: We are both, we have our own factory and we can export by ourself.

Q2.  What kind of payment do you accept?

A: Paypal, T/T, Weston Union are all accepted.

Q3. What is normal lead time?

A: Average 15-25days for tooling, bulk orders should be depends on quantity.

Q4. What is your standard package?

A: In general we use ziplock bag or bubble film plus cardboard boxes, wooden pallets or wooden cased will be used if necessary. Special packing method is available if needed.

Q5. What is the working life of the mould?

A: It depends on the parts we made. Besides, we will maintain or replace the mould by ourselves.