Fashionable Four Wheel Electric Skateboard For Adult

Fashionable Four Wheel  Electric Skateboard For Adult

What durometer electric polyurethane skateboard wheels do I need?

Durometer measures the wheels hardness. Harder wheels are faster; softer wheels are slower but have better grip.

Skateboard wheel durometer is usually measured on a Durometer A Scale which goes from 1-100 to measure hardness. Some companies use the B Scale which measures 20 points lower, allowing the scale to be extended by 20 points for harder wheels. For instance, an 80b durometer is the same as 100a durometer. These skateboard wheels have a larger and more accurate range of hardness. The average wheel durometer is 99a.

78a-87a Soft wheels good for rough surfaces, longboards, or street boards that need lots of grip to easily roll over cracks and pebbles. Designed for smooth rides, cruising, longboards, hills, and rough surfaces.

88A-95A Slightly harder and faster with a little less grip, but the grip is still good. Good for street and rough surfaces.

96A-99A Nice speed and grip-- an all-around good wheel. Great for beginners skating street, skate parks, ramps, pools, and other smooth surfaces.

101A Hardest and fastest wheel with the least grip. Ineffective on slick and rough surfaces. These are pro wheels.

83B-84B Wheels using the B scale are extremely hard, measuring 20 points lower than the the A Scale in order to allow the scale to extend another 20 points for harder wheels.

Our production line

FAQ

Q1. Are you manufacture or trade company?

A: We are both, we have our own factory and we can export by ourself.

Q2. What kind of payment do you accept?

A: Paypal, T/T, Weston Union are all accepted.

Q3. What is normal lead time?

A: Average 15-25days for tooling, bulk orders should be depends on quantity.

Q4. What is your standard package?

A: In general we use ziplock bag or bubble film plus cardboard boxes, wooden pallets or wooden cased will be used if necessary. Special packing method is available if needed.

Q5. What is the working life of the mould?

A: It depends on the parts we made. Besides, we will maintain or replace the mould by ourselves.